Filter
Top Products
Preparation
11
Display language
1 {ih} i " (middle soft key)
2 Select N by pressing {^}, {V}, {<}, or
{>}. i # (middle soft key)
3 Press {^} or {V} to select “Display
Setup”. i #
4 Press {^} or {V} to select “Select
Language”. i #
5 Press {^} or {V} to select the desired
language.i # i {ih}
Note:
L If you select a language you cannot read,
press {ih}, ", press {V}, press #,
press {V} 2 times, press #, press {V} 3
times, press #, select the desired
language, then press #. Press {ih}.
Date and time
1 " (middle soft key)
2 Select N by pressing {^}, {V}, {<}, or
{>}. i # (middle soft key)
3 Press {^} or {V} to select “Time
Settings”. i #
4 Press {^} or {V} to select “Set Date &
Time”. i #
5 Enter the current day, month, and year.
Example: 17 May, 2006
{1}{7} {0}{5} {0}{6}
6 Enter the current hour and minute.
Example: 3:30 PM
{0}{3} {3}{0} i Press {*} until
“03:30 PM” is displayed.
7 # i {ih}
Note:
L To correct a digit, press {<} or {>} to
move the cursor, then make the
correction.
L The date and time may be incorrect after a
power failure. In this case, set the date
and time again.
TG1861NZ(e).book Page 11 Thursday, June 1, 2006 4:54 PM