Filter
Top Products
1.1 System Highlights
16 Installation Manual
1.1 System Highlights
1.1.1 System Highlights
Built-in Voice Message (BV) (Optional voice message card required)
Built-in Voice Message (BV) allows a caller to leave a voice message in a user's personal message
area or the PBX's common message area.
Fixed Line SMS Terminal Support (Optional Caller ID card required)
The PBX can relay incoming calls from a Short Message Service (SMS) centre to specific single line
telephones (SLTs) that support SMS. Fixed Line SMS is a service that allows text messages to be
sent and received via Public Switched Telephone Network (PSTN) access. We recommend using
SMS-enabled Panasonic SLTs.
Caller ID Display on SLT (Optional Caller ID card required)
The PBX can receive Caller ID information (telephone numbers and callers' names) from calls
received on outside (CO) lines. This information can be shown on the displays of SLTs that support
Caller ID as well as proprietary telephones (PTs) when receiving calls.
3-level Automated Attendant (AA)
3-level Automated Attendant (AA) service allows a caller to dial a single-digit number (Direct Inward
System Access [DISA] AA number) following the guidance of 3-level DISA outgoing messages
(OGMs), and be connected to the desired party automatically.
Call Charge Calculation
The PBX can automatically calculate the approximate cost of calls and limit telephone usage to a
preprogrammed budget on each extension. This feature allows users to calculate the cost of a call
based on time, the leading digits of a phone number and/or the outside (CO) line carrying the call.
Station Message Detail Recording (SMDR)
The PBX (with an optional message expansion card) can automatically log up to 10 000 incoming/
outgoing outside (CO) line calls and 10 000 outgoing outside (CO) line calls for each extension. It is
possible to log the Date, Time, Dial number, Duration and Charge of each call. The call logs can be
output via the Serial Interface (RS-232C) port to a PC, printer, etc.
PC Programming
System programming settings can be accessed using a PC and the Panasonic KX-TE Maintenance
Console software as well as by using a PT.
The PBX software can be upgraded via the Serial Interface (RS-232C) port or USB port, using the
KX-TE Maintenance Console software.
Quick Setup
Basic PBX parameters such as Automatic Configuration for Outside (CO) Line Type, Country Setting
can be programmed the first time the PBX is accessed with a PC using the KX-TE Maintenance
Console software.
Advanced Hybrid System
This PBX supports the connection of PTs, Direct Station Selection (DSS) Consoles and single line
devices such as SLTs, fax machines, wireless telephones and data terminals.