Filter
Top Products
Bell selection All handsets
Bell interval (First ring) 3
Flash timing 100msec
Pause timing 3 seconds
Call restricted All clear
handset(s)
Call restriction All clear
number(s)
Base unit PIN 0000
Base unit ringer volume 2 (MEDIUM)
Base unit ringer pattern 1
Key tones ON
57
Advanced Operations
Chapter 3
On the base unit
This function enables the base unit to clear the following settings at one time. They will return to their
initial settings.
1 Press .
2 Press or until the arrow points to
“Setting Base”, then press .
•“Input Command” is displayed.
3 Press .
4 Enter the 4-digit base unit PIN (p. 55).
5 Press .
•A beep sounds.
•To return to the standby mode, press .
0
Function
Initial setting
Function
Initial setting
Input Command
------------
KX-TCD715ALM-7Advance2 6/20/02 18:48 Page 57