Filter
Top Products
43
Special Features
Basic Operations
Chapter 2
Ex. Line access number (PBX)
➡➡
Phone number
9
9
1 Press .
2 Press or until the arrow points
to “Setting Base”, then press .
•“Input Command” is displayed.
3 Press .
4 Enter the 4-digit base unit PIN (p. 55).
•The factory preset is 0000.
5 Press .
•The current timing is displayed.
1: 3 seconds 2: 5 seconds
3
3
6 To select 5 seconds, press .
OR
To select 3 seconds, press .
7 Press .
•A beep sounds.
•To return to the standby mode, press
.
•If 5 beeps sound in step 4, the entered PIN is
incorrect. Enter the correct PIN.
1
2
How to Use the Pause Feature
(For Analog PBX Line/Long Distance Service Users)
We recommend you press if a pause is required for dialling with a PBX or to access a long
distance service.
•Pressing creates a pause.
This prevents misdialling when you redial or dial a stored number.
•Pressing more than once increases the length of the pause between numbers.
Setting the pause timing
You can set the pause timing to 3 seconds or 5 seconds, depending on your PBX requirements. The
factory preset is 3 seconds.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
Input Command
33 1
Ex. 3 second is selected.
KX-TCD715ALM-5Basic3 6/20/02 18:47 Page 43