Filter
Top Products
Basic Operations
Chapter 2
6 To select “Flash 1(700msec)”, press .
OR
To select “Flash 2(100msec)”, press .
7
Press .
•A beep sounds.
•To return to the standby mode, press
.
•If 5 beeps sound in step 4, the entered PIN is
incorrect. Enter the correct PIN.
2
1
1 Press .
2 Press or until the arrow points
to “Setting Base”, then press .
•“Input Command” is displayed.
3 Press .
4 Enter the 4-digit base unit PIN (p. 55).
•The factory preset is 0000.
5 Press then .
1
2
3
Call Waiting and Caller ID Compatible
If you subscribe to Caller ID and Call Waiting service, your handset displays a second caller’s
information while talking. After you hear a second caller waiting tone, the caller’s phone number and
“CALL WAITING” will be displayed.
You can answer the second call, keeping the first call on hold.
•If the phone number is stored in the directory, the caller’s name will be displayed (p. 32).
•Please consult your telephone company for details and available in your area.
Selecting the Flash mode
• Users in Australia can access Telstra’s “EASY CALL” service by having the recall time set at
100msec (this is the factory default setting), and then follow Telstra’s “EASY CALL” instructions to
operate this service.
• If you are connected via a PBX, a longer or shorter recall time may be necessary to use PBX
functions (transferring a call etc.). Consult your PBX supplier for the correct setting.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
KX-TCD715ALM-5Basic3 6/20/02 18:47 Page 45