Panasonic KX-TCD715ALM Telephone User Manual


 
Chapter 2
21
Basic Operations
00-00-00
To dial after confirming the
entered number
1 Enter a phone number.
The entered number is displayed.
If you misdial, press . Digits are erased
from the right.
To cancel, press and hold or press
.
2 Press .
“” is displayed.
After a few seconds, the display will start
showing the length of the call.
3 To hang up, press or place the
handset on the base unit.
The handset will return to the standby
mode.
C
C
Making Calls
1 Press .
“” is displayed.
2 Dial a phone number.
The dialled number is displayed.
After a few seconds, the display will show
the length of the call.
If “ ” flashes and an alarm tone sounds
after pressing or , move closer to
the base unit. Then try again.
You can choose whether to display either the
length of the call or phone number in the talk
mode by programming (p. 51).
3 To hang up, press or place the
handset on the base unit.
The handset will return to the standby
mode.
12345678
To have a hands-free phone
conversation (Using Digital
Speakerphone)
1 Press .
The button lights.
2 Dial a phone number.
The dialled number is displayed.
After a few seconds, the display will show
the length of the call.
3 When the other party answers, talk into
the microphone.
4 To hang up, press or place the
handset on the base unit.
With the Handset
Make sure that the power is ON (p. 13).
KX-TCD715ALM-3Basic1 6/20/02 18:46 Page 21