Filter
Top Products
With
thghandset
7
Press ITALKJ.
2 Dial a phone number
3 To hang up, press
(m]
or place the handset on the base unit.
*To dial after confirming the entered number, enter a phone number and press
I=].
*If
noise Interferes with the conversation, press
FUNCTIONIEXITICH
to select a clearer
channel or move closer to the base unit.
*To
select the
recerver
volume, press
@
or
@
while talking. 3 levels (HIGH, MEDIUM,
LOW) are available. Each time you press, the volume level will change.
With the base unit
7
Press
[DIGITAL
sp-PHONE).
2 Dial a phone number
3 When the other party answers, talk
into
the MIC.
4 To hang up, press
(DIGITAL
SP-PHONE).
*To select the speaker volume, press
@
or
@
while talking. 8 levels are available. Each
time you press, the volume level will change.
Answering Calls
With the handset
Press (TALKJ.
*YOU
can also answer a call by
pressrng
any dialing button
@
to
@,
@
or
(@.
aIf you set the Auto Talk feature to ON, you can answer a call by lifting the handset off
the base unit (see page 16
In
the Operating Instructions).
With the base unit
Press (DIGITAL SP-PHONE] and talk
into
the MIC.
One-Touch Dialer
A phone number stored
In
the [DIRECT) button can be dialed with a one-touch
operation.
To store a phone number in the DIRECT button
Use the handset near the base unit. Make sure the unit IS
In
the standby mode
initially
[FUNCTION/EXIT/CH]
+
@
or
@j
to
select
“Program"
+
FWDlEDlT
@
(Yes
key)
+
FWDlEDlT
@
(Y
es
key) while the arrow points to
“Save
DIRECT#"
I)
+
1 Phone number (up to
22
digits) 1
+
@
(Next key)
+
PWDlEDtT
@
(Save
key)
To dial a stored number in the DIRECT button
[olRECT)
+
[six]
*The
stored number IS dialed.
-3-