Filter
Top Products
I)
Using the Caller List
Storing Caller List Information in the Directory
You can store names and phone numbers that are in the Caller List into
the directory Storing must be carried out with the handset.
Make sure the unit is in the standby mode initially.
1
Press
@
or
@
to enter the Caller List
2
Press
@
or
@
repeatedly to find the
caller you want to store in the directory,
and press
FWD/EDIT
@
(Yes key)
*If
the number requires editing, see page
36
3
Press
Q
or
IXJ
to select
“Save
directory",
and press
FWD/EDIT
@I
(Yes
key)
If there is no name information for the
caller,
“Enter name"
will be displayed.
a) If a name is not required, press
@
(Next
key) and press
FWD/EDIT
@
(Save
key)
b) If a name is required, enter the name
(p 45) When finished, press
@
(Next
key) and press
FWD/EDIT
@
(Save
key)
*A beep sounds
*To continue storing other items, repeat from
step 2
*To return to the standby mode, press
(FUNCT~~N/EX~T/CH)
10 new calls
TA b=Directorb
*YOU
can exit the programming mode any time by pressing
(FUNCTION/EXIT/CH)
*If
the display shows
“Directory
full"
in step
3,
press
(FUNCTI~N/EXIT/CH)
to exit the list To erase other stored items from the directory, see page 51
*After the maximum of 50 items has been stored,
"Directory
f
ull"
is also displayed
*You cannot store caller information in the directory if a phone number is not
displayed
*If 3 beeps sound and the display shows
“Save error",
move closer to the base
unit and start again from step 1
38