Filter
Top Products
How to Use the PAUSE Button
(For PBX Line/Long Distance Calls)
We recommend you press (REDIAL/PAUSE) if a pause is required for
dialling with a PBX or to make a long distance call.
Ex. Line access number (9) (PBX)
(9) \ (REDIAL/PAUSE) \
•Pressing (REDIAL/PAUSE) once creates a 3.5 second pause. This prevents
misdialling when you redial or dial a stored number.
•Pressing
(REDIAL/PAUSE)
more than once increases the length of the pause
between numbers.
Phone number
51
Cordless Telephone
1
Press (FUNCTION/EXIT/CH).
2
Press Ö or Ñ repeatedly until the arrow
points to “Program”, and press FWD/EDIT
á
(Yes key).
3
Press Ö or Ñ repeatedly until the arrow
points to “Recall time”, and press
FWD/EDIT á (Yes key).
4
Press Ö or Ñ repeatedly until the desired time is displayed, and
press FWD/EDIT á (Save key).
•A beep sounds.
•To return to the standby mode, press (FUNCTION/EXIT/CH).
H
Program
LCD contrast
GF H
=Yes
Save DIRECT#
H
Recall time
GF H
=Yes
RECALL Button
Pressing (RECALL/PLAYBACK) allows you to use special features of your
host PBX such as transferring an extension call or accessing special
telephone services (optional) such as call waiting.
Selecting the recall time
The recall time depends on your telephone exchange or host PBX.
You can select the following recall times: “700, 600, 400, 300, 250, 110,
100 or 90 msec (milliseconds)”. KX-TG2581AL comes from the factory set
to “100 msec” and KX-TG2581NZ comes from the factory set to “600
msec”.
Make sure the unit is in the standby mode initially.