Filter
Top Products
4
While the arrow points to “Save
DIRECT#”, press FWD/EDIT á (Yes key).
5
Enter a phone number, up to 22 digits.
•Each time you press (INTERCOM/CLEAR), a
digit is erased. To erase all digits, press and
hold (INTERCOM/CLEAR).
•To move the cursor, press BACK Ü or
FWD/EDIT á.
6
Press Ö (Next key).
•If you want to edit the entered number, press
Ñ (Edit key) and return to step 5.
7
Press FWD/EDIT á (Save key).
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If a pause is required for dialling, (REDIAL/PAUSE) can be stored in a phone
number in step 5. This counts as one digit (p. 51).
40
IH G
=Next
123456789012345
6789012
F
=Edit
H
=Save
123456789012345
6789012
Save DIRECT#
123456789012345
6789012
IH G
=Next
Dialling the Stored Number in the DIRECT Button
1
Press (DIRECT).
•The stored number is displayed.
2
Press (TALK).
•The number is dialled.
•You can also dial the stored number by pressing (TALK) then pressing (DIRECT).
123456789012345
6789012
One-Touch Dialler
You can store one phone number in the (DIRECT) button of the handset.
The stored number is dialled with a one-touch operation.
Storing a Phone Number in the DIRECT Button
Make sure the unit is in the standby mode initially.
1
Press (FUNCTION/EXIT/CH).
2
Press Ö or Ñ repeatedly until the arrow
points to “Program”.
3
Press FWD/EDIT á (Yes key).
H
Program
LCD contrast
GF H
=Yes
H
Save DIRECT#
Recall time
GF H
=Yes