Filter
Top Products
27
Preparation
Selecting the Number of Rings
You can select the number of times the unit rings before the answering
system answers a call, from “3” to “7” or “AUTO” (for Toll Saver*).
Your phone comes from the factory set to “4”.
1
Press (FUNCTION/EXIT/CH).
2
Press Ö or Ñ repeatedly until the arrow
points to “Program”.
3
Press FWD/EDIT á (Yes key).
4
Press Ö or Ñ repeatedly until the arrow
points to “TAD program”.
5
Press FWD/EDIT á (Yes key).
•“P” is displayed on the base unit.
6
Press (2).
•The current setting is displayed on the base
unit.
7
Press (0), or (3) to (7) to set the number of rings.
0: Selects “AUTO”. “A” is displayed.
3–7: The unit will answer after the selected number of rings.
8
Press FWD/EDIT á (Save key).
•A beep sounds.
•To return to the standby mode, press (FUNCTION/EXIT/CH).
*Toll saver (When set to “AUTO”)
When you call the unit from a touch tone telephone:
If the unit answers on the 3rd ring, there is at least one new message.
If the unit answers on the 5th ring, there are no new messages.
Hang up when you hear the 4th ring. This will save you the toll
charge for the call.
H
TAD program
GF H
=Yes
H
Save directory
Ringer volume
GF H
=Yes
H
Program
LCD contrast
GF H
=Yes
H
Save DIRECT#
Recall time
GF H
=Yes
Time/day Adj.
→
0
See manual for
other settings.