Erasing Caller List Information
After checking the Caller List, you can erase some or all of the entries.
Make sure the unit is in the standby mode initially.
To erase a specific caller from the Caller List
1
Lift the handset off the base unit and press
Ö or Ñ to enter the Caller List.
2
Press Ö or Ñ repeatedly to find the caller
you want to erase from the Caller List.
3
Press (INTERCOM/CLEAR).
•A beep sounds and the information is erased.
•To erase other items, repeat from step 2.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
38
Using the Caller List
0246813579
12:20A JAN12 √
Clear
10 new calls
GF H
=Directory
•You cannot store caller information in the directory if a phone number is not
displayed.
•If 3 beeps sound and the display shows “Save error” in step 5, move closer to
the base unit and start again from step 2.
For New Zealand Users:
Your telephone company may charge you for a local call if the number
dialled has the area code prefix included. If the charge for local call is
unacceptable, only the 7-digits of the local number should be dialled
from your telephone. Do not dial the “0” prefix or the area code digit.