Filter
Top Products
24
1
Press (FUNCTION/EXIT/CH).
2
Press Ö or Ñ repeatedly until the arrow
points to “Program”.
3
Press FWD/EDIT á (Yes key).
4
Press Ö or Ñ repeatedly until the arrow
points to “TAD program”.
5
Press FWD/EDIT á (Yes key).
•“P” is displayed on the base unit.
6
Press (0).
•“Set time” is announced.
If previously adjusted, the day/time will be heard.
7
Enter the time (hour and minute) using a 4-digit number.
(Ex. To set 9:30, enter “0930”.)
•The last two digits of the entered number are displayed.
8
Press (*) to select “AM” or “PM”.
Press (#) repeatedly to set the day.
9
Press FWD/EDIT á (Save key).
•The unit announces the day/time. The clock starts working.
•If 6 beeps sound, the setting is not correct. Start again from step 5.
•To return to the standby mode, press (FUNCTION/EXIT/CH).
Day and Time Adjustment
Voice Time/Day Stamp: During playback, a synthesized voice will
announce the day and time that each message was recorded.
H
TAD program
GF H
=Yes
H
Save directory
Ringer volume
GF H
=Yes
H
Program
LCD contrast
GF H
=Yes
H
Save DIRECT#
Recall time
GF H
=Yes
Time/day Adj.
→
0
See manual for
other settings.
Preparing the Answering System