Filter
Top Products
46
Receiving Faxes
When you are not in, and the AUTO ANSWER mode of your unit is set to off (TEL mode), you
can turn the AUTO ANSWER mode on from a remote location using a touch tone telephone.
AUTO ANSWER mode:
—
FAX ONLY mode
—
TEL/FAX mode
—
TAD/FAX mode (KX-FP185/KX-FM189 only)
■
For KX-FP181
1. Call your unit and wait for 10 rings.
●
You will hear a beep signal.
2. —To switch to the FAX ONLY mode:
Press within 8 seconds.
—To switch to the TEL/FAX mode:
Press within 8 seconds.
3. Hang up the handset.
Note:
●
Press or within 8 seconds after hearing the beep, otherwise the call will be interrupted and the
unit will remain in the TEL mode.
■
For KX-FP185/KX-FM189
1. Call your unit and wait for 10 rings.
●
You will hear a beep signal.
2. Enter the remote operation ID (feature #11 on page 66) within 8 seconds.
●
You will hear a beep signal.
3. —To switch to the FAX ONLY mode:
Press within 3 seconds.
—To switch to the TEL/FAX mode:
Press within 3 seconds.
—To switch to the TAD/FAX mode:
Wait for 3 seconds, then the greeting message will be played.
4. Hang up the handset.
Note:
●
Enter the remote operation ID within 8 seconds after hearing the beep, otherwise the call will be
interrupted and the unit will remain in the TEL mode.
Turning the AUTO ANSWER mode on remotely!!