Filter
Top Products
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 7
Preparation
Symbols used in this
manual
These are the symbols that will navigate
through these operating instructions.
Display language
To change the display language
1 {j/OK}
2 “SETTING HS” ({v}) i {>}
3 “DISPLAY OPT” i {>}
4 “LANGUAGE” i {>}
5 Select the desired language. i {>}
i {ih}
Note:
LIf you select a language you cannot read,
reset the handset to its default settings:
− {j/OK} i {v} i {>} i {e}
i {>}
− Enter handset PIN (default: “0000”).
− {v} i {>} i {ih}
Setting the date and time
Important:
LConfirm that the AC adaptor is connected.
1 {j/OK}
2 “SETTING BS” ({v}) i {>} i {*}
3 Enter the current hour and minute (24-
hour time entry).
LIf you make a mistake, press {C}.
Digits will be cleared from the right.
4 {>} 2 times i {*} 2 times
5 Enter the current day, month and year.
LIf you make a mistake, press {C}.
Digits will be cleared from the right.
6 {>} i {ih}
Symbol Meaning
{j/OK} Press {j/OK}.
i Proceed to the next
operation.
“ ” Press {e} or {v} to select
the words in quotations
shown on the display.
TCD150E(E).book Page 7 Wednesday, May 25, 2005 4:58 PM