Filter
Top Products
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 15
Useful Information
The handset will not turn on. LMake sure that the batteries are installed correctly
(page 5).
LFully charge the batteries (page 5).
A busy tone is heard when {C}
is pressed.
LThe handset is too far from the base unit. Move
closer and try again.
Static, sound cuts in/out, fades.
Interference from other electrical
units.
LLocate the handset and the base unit away from
other electrical appliances.
LMove closer to the base unit.
LYour unit is connected to a telephone line with DSL
service. We recommend connecting a filter
(contact your DSL service provider) to the
telephone line between the base unit and the
telephone line jack.
Noise is heard during a call. LYou are using the handset or base unit in an area
with high electrical interference. Locate the
handset and base unit away from interference
sources, such as antenna and mobile phones.
Pressing {R} does not display/
dial the last number dialled.
LThe redialled number was more than 24 digits
long. Redial the number manually.
I fully charged the batteries, but
074 still flashes.
LClean the charge contact and charge again (page
5).
LIt is time to replace the batteries (page 5).
Caller information is not
displayed.
LYou must subscribe to Caller ID service.
LYour unit is connected to a telephone line with DSL
service. We recommend connecting a filter
(contact your DSL service provider) to the
telephone line between the base unit and the
telephone line jack.
Problem Cause & solution
TCD150E(E).book Page 15 Wednesday, May 25, 2005 4:58 PM