Filter
Top Products
- Operation -
16
4.7 Redial
If a connection that you have dialled is engaged or you were unable to get
through to anybody, simply replace the receiver. The last number dialled will be
saved in the telephone automatically. The last three numbers dialled remain
stored in the telephone. To call one of the last three numbers dialled, proceed
as follows:
Select one of the last three numbers by repeatedly pressing the button.
Press the ENTER button. After the number has been dialled, the telephone switches
immediately to the handsfree facility. By lifting the handset, the call can be continued
via the handset.
You can also delete a particular number from the redial memory. Select the
required telephone number with the handset on the hook by using the
button and press the C button.
4.8 Automatic Redial
The automatic redial is a useful aid to make telephoning easier for you. If a
number is engaged, the number will be repeated automatically up to ten times.
Attempt to call to the required party.
If the line is engaged, press the
AUTO-
button. The display shows ”Pls Hang
Up”. Replace the handset on cradle. The display shows “Auto redial”. The LED next to
the handsfree button flashes.
If you made the call using the handsfree facility, the call is ended automatically.
Now, after about 30 seconds your telephone will try to call the number again. The
handsfree facility is switched on and the number is dialled. If the number is still
engaged, the handsfree facility automatically switches itself off again after a short time
and your telephone waits for a further 30 seconds before another attempt is made.
If the call is answered, you can press button to carry out the call using the
handsfree facility. By lifting the handset, the call can be continued via the handset.
Note: By lifting and replacing the handset once, the automatic redial is automatically
cancelled.