Filter
Top Products
- Setting up -
12
3.14 Outside Line Code on a PBX (business users only)
If you have connected your telephone to a PBX, you may need to dial a
particular number (e.g. “9” or “0”) in order to get dial tone for an outside line. If
you have transferred the telephone numbers from your SIM card to your
telephone, these telephone numbers will be automatically prefixed by the
outside line code when dialling. To enable this you must program the outside
line code necessary for your PBX.
A. Please follow the instructions: Display shows:
Press the MENU button once.
Add entry
Turn the Jog dial until the “Settings” message appears in
the display
Settings
Confirm with YES.
Clock
Turn the Jog dial until the “PBX prefix” message appears
in the display.
PBX prefix
Confirm with YES.
Note: codes already entered will not be shown in the
display.
Number:
Now enter your own outside line code.
e.g. “0”
Confirm with YES.
Stored – PBX prefix
To exit programming mode, press the NO button twice.
Note: If you want to delete an outside line code already stored, do not enter
a number when programming and confirm the blank display.