Filter
Top Products
10
Pre Dialing a Call
1. Dial the number you wish to call the telephone will speak out the numbers
as you dial them (with voice option ON). To correct a number press the
DELETE button for each incorrect digit.
2. Pick up the handset, press CALL BACK or press the SPEAKER button.
6.2 Receiving a Call
When you receive a call, the telephone rings, the Ringer LED flashes, and
the display shows the CALL# and the caller telephone number (with caller id
service activated). The phone will say the name of the caller if the number
matches a name recorded in the phone book, if not, it will say the numbers
of the caller.
This feature allows you to decide to pick up the phone or not depending on
who is calling.
If you want to talk to the caller:
1. Pick up the handset or press SPEAKER button to answer the call.
2. At the end of the call, return the handset to the cradle or press SPEAKER
button again.
Answering a call telephone call with the remote pendant
If you are within a few meters of the TP170WP you can answer an incoming
call by pressing the red button on the remote pendant, the telephone will
answer the call and activate the speakerphone so you can speak to the
caller without picking up the handset. By pressing the red button of the pendant
a second time you will deactivate the speakerphone and return to standby
mode.
This feature is particularly useful if you are relaxing and do not wish to get up
to answer the telephone.
6.3 Speaker Volume Control
You can adjust the speaker volume level that suits you by sliding the VOLUME
switch.
6.4 Last number Redial
To redial the last number called:
1. Lift the handset or press SPEAKER button.
2. Press the REDIAL button.
3. The last number you dialed (manually) will then be can be redialled.