Oricom pro800 DECT Cordless Telephone User Manual


  Open as PDF
of 40
 
13
Using the menu
Changing the Prole "Equaliser" setting
or , Select"Equaliser"
or ,save Selectandconrm
Press the keytoreturntostandby.
Copy a User Prole
Youcancopyauserproletoanothercompatible,
registered handset.
, or , OpentheMenu,select"Prole"
or , Select"Prole1or2"
or , Select "Copy"
<>2,3,4 Select the handset
or Conrmorcancel
Selecting a Prole for use
Incoming calls
Whenyoureceiveanincomingcallandbeforeyou
answerthetelephone,presstheM1orM2keyforthe
proleyouwishtouse.
Thedisplaywillconrmtheprolethathasbeen
selected and you can answer the call as normal.
Outgoing calls
Whenyouwishtomakeanoutgoingcall,pressandhold
theM1orM2keyfortheproleyouwishtouse.The
displaywillconrmtheprolethathasbeenselected
andyoucannowmakeyouroutgoingcallasnormal.
UserprolescannotbeselectedinHandsfreemode.
If you do not dial your outgoing call within 30 seconds
ofpressingtheM1orM2key,theselectedprolewill
timeoutandthedefaulttelephonesettingswillbeused
for the call.
Pro_600_800.indd 13 2008-11-11 16:17:36
 previous next