Filter
Top Products
18
PIN code
A PIN is required for registration and deregistration. The ex-factory PIN is
0000 but you can change this code.
1. Press
PROG
during standby follow by the 8 key.
2. Enter the current PIN and press
OK
.
3. Enter the new PIN. It can contain from 0 up to 8 digits. Press
OK
.
4. Repeat the new PIN and press
OK
to confirm the new code. You will
hear a confirmation tone if it is successful, or a reject tone if the same
PIN is not entered.
Reset
If you reset the phone, all the settings will return to the factory default
settings.
1. Press
PROG
during standby. Then press and hold DEL until RESET
is displayed.
2. Press
OK
to confirm the action.
You cannot reset the phone if the handset has lost link with the base.
UNAVAIL will be displayed. Re-establish the link and try again.
OTHER FEATURES
Key lock
Press and hold
during standby to lock the keypad. appears
whenever keypad is locked.
When the keypad is locked, you can still answer an incoming call by
pressing
. During the call, the keypad functions as normal. When the
call is ended, the keypad will be locked again.
To unlock the keypad, press any key and then press
OK
when you see
PRESS OK.
OTHER FEATURES