Filter
Top Products
11
When you end a call, the timer will be displayed for 5 more seconds before
the screen returns to the handset label.
Adjusting the volume
During a call you can adjust the earpiece volume.
Press
to adjust the receiver volume. The display shows the
volume level of high “OOO”, medium “OO” or low “O”.
NOTE: When you hang up the volume with return to the default level.
Muting the call
1. Press MUTE to mute the call.
turns on. The caller would not be
able to hear you but you would still be able to hear the caller.
2. Press MUTE again to unmute the call.
Chain dialing
You can dial out numbers from the phonebook even after you have seized
the phone line. And there is no limit to the number of times chain dialing is
accessed.
1. Press
. turns on.
2. Press
to scroll through the phonebook records. Or you can
use the number keys to jump directly to the record starting with the
corresponding letters of that key. If you decide to quit using chain
dialing, simply press
to exit.
3. Press
OK
to dial out the number.
Call waiting
You can use the recall function to answer a second call while you are on the
phone. However this service will need to be turned on. For example to turn
on Telstra’s Call Waiting service:
1. Press
wait for dial tone then Press *43#
2. You will hear a service tone then Press .
Take two different calls at the same time
If you have subscribed to your telephone network operators Call Waiting
Caller ID service, your phone will display the number of the second incoming
call for around 20 seconds while you are talking on the phone.
During a call, you will hear two loud beeps periodically to notify you of
another incoming call. If you wish to answer this call