Filter
Top Products
10
Predialing
Pre-dial allows you to enter a telephone number and verify it on the screen
before you place the call. The screen displays the last 12 digits dialed but
you can enter up to 20 digits.
1. Enter the phone number.
2. To enter a pause, press and hold
#
. A pause is displayed as “P”.
3. When you enter more than 12 digits, turns on. If you attempt to enter
more than 20 digits, you’ll hear a reject tone.
4. If you make a mistake, press
DEL
to erase one digit at a time. Or you
can press
to clear the entire number and return the phone to
standby.
5. Press
to dial out the number.
Dialing from a phonebook record
1. Press .
during standby. in the display turns on.
2. Press
to search for the record that you would like to dial. Or
you can use the number keys to jump directly to the record starting with
the corresponding letters of that key.
3. Press
OK
repeatedly will show the name and number of the record
accordingly.
4. Press
to dial out the number.
Redialing the last dialed number
1. Press
. The last number dialed is displayed.
2. turns on when the number contains more than 12 digits. Press
OK
to view the off-page digits.
3. Press
to dial out the number.
During an external call
Call timer
The call timer will be displayed a short while after your call is connected. It
shows the duration of the call. This timer is shown in minutes and seconds
(MM-SS) in the first hour. After that, it will be shown in hours and minutes
(HH-MM) with the “-“ blinking to indicate the seconds.
01-10