Filter
Top Products
12
1. When the handset receives a second call, the number of the caller
appears on the display. It will display for 20 seconds or until you press a
key on the phone. Press
listen for dial tone then Press 2 to put
the current call on hold and talk with the second caller.
2. Subsequent presses of
listen for dial tone then Press 2 will toggle
you between these 2 callers.
Caller information of this second call will be stored in the call log.
CALLER ID
If you subscribe to the Caller ID service, your phone automatically stores the
last 10 incoming calls. Each record holds up to 20 digits.
When the phone rings and caller information is received, the display will
show the last 12 digits of the callers number. If there is an identical phone
number stored in the phonebook, that phonebook name will be displayed
instead of the CID name.
Reviewing CID records
1. Press
when the phone is in standby. If the call log is not
empty, turns on and the caller name of the most recent CID record is
displayed.
2. Press
OK
to view the number.
3. Press
OK
again to see the date / time when the call was received.
4. Whether you are viewing the name, number or date/time, pressing
will display the next older record and the next newer record.
When
turns on, it means that received number is a new number.
Call back from a CID record
While you are viewing a CID record, you can return the call provided that it
contains a valid phone number by pressing
.
Saving a CID record to phonebook
You can save a CID record into the phonebook provided that it contains a
valid phone number and the phonebook is not full.
While you are viewing the CID record that you would like to save,
1. Press
.
CALLER ID