Oricom ECO800 Cordless Telephone User Manual


  Open as PDF
of 36
 
21
Advanced Settings
Advanced Settings
Setting the Recall time
Tworecalltimingsareavailable.Short100ms(Australia)
andLong600ms(NewZealand).
,
4
or
5
, OpentheMenu,select“RECALL”
SHORT Thecurrentsettingisshown
4
or
5
,
Selectandconrm“SHORT”or“LONG”
R (Recall) button on PBX phone systems
IfthetelephoneisconnectedtoaPBXphonesystem
functions such as transferring calls and automatic call
backcanbeusedviatheRbutton.
R (Recall) button and Supplementary services
Your telephone supports the supplementary services
offeredbyyourtelephonenetworkprovider,suchas
call waiting and conference calls. The supplementary
servicescanbeusedinconjunctionwiththeRbutton.
Pleasecontactyourtelephonenetworkproviderwith
regardtoenablingthesupplementaryservicesand
whichrecalltimemustbeused.
Dialling pause (PBX ONLY)
WhenusingsomePBXphonesystems,ittakesalittle
timebeforethedialtonebecomesavailable.Itispossible
toinsertapauseafterthenumberfortheoutsidelineso
thatthenumbercanbedialledinacontinuousprocess
without having to wait for the dial tone.
2 sec
Insertadiallingpause.“P”isshownin
the display
Thepausecanalsobeenteredwiththephonenumber
inthephonebook.
Reset to default settings
You can reset your handset to its original default settings.
Thephonebook,callsandrediallistsarenotdeleted
when you reset the handset.
,
4
or
5
, OpentheMenu,select“RESET”
, , EnterthePINcodeandconrm
 previous next