Oricom ECO800 Cordless Telephone User Manual


  Open as PDF
of 36
 
19
Using Remote Access (eco800 Only)
Remote Access (eco800 Only)
You can call your answering machine from any Tone
phoneormobilephonewhilstyouareawayfromhome
to listen to your messages.
PIN Code for remote access
A3-digitPINcodeisrequiredforremoteaccesstoyour
answeringmachine.Thedefaultcodeis“000”butfor
security reasons you should change this code.
Changing the PIN code
2secPINCODE Announcesthecurrentsecuritycode
(Underbase) andpromptsfor1stdigit
Selectthe1stdigit
Conrmthedigit
Select the 2nd digit
Conrmthedigit
Selectthe3rddigit
Conrmthedigit.Yournewsecuritycode
willbeannounced
Pressthe keyatanytimetoexitfromchanging
thePINcodeandreturntostandby.ThePINcodewill
then remain unchanged.
Call in to check your messages
Dialyourownphonenumberandwait
untiltheansweringmachinepicksup
the call
2x,
, Switch to remote access and enter your
3digitPINcodeafterthevoiceprompt
IfyouenteryourPINcodeincorrectly,theanswering
machine will hang up the call.
IfyouenteryourPINcodecorrectlyyoucannowremotely
controlyouransweringmachinebyusingthedigitsonthe
keypad.
 previous next