Filter
Top Products
20
Figure 21 – Device Server List, no NV-M3 connected
(3) Make sure that the NuVo NV-M3 is plugged into an AC outlet and blue STANDBY LED is lit.
Connect the NV-M3 to the device server using the supplied USB cable. A “+” icon should
appear in the box to the left of the Device Server list entry. Left-click the “+” icon to the left
to expand the view, showing the connected device, as shown in Figure 22.
(4) Select the “Freescale Inc MCF5251 Device” (representing the NV-M3's Main Processor). Left-
click the “Connect” button. You should see the “Connecting” status window as shown in
Figure 23.