Filter
Top Products
16
After the Access Point Search completes, you will get the window shown in Figure 17. Check the “Skip
wireless configuration” box in the lower left, and all settings for wireless will “gray out”. You are
setting up for wired operation only, and do not need to configure them. Left-click “Next”.
Figure 17 – Skipping the wireless configuration
The window shown in Figure 18 will come up. The only thing to check is that the DHCP settings match
earlier selections. As discussed in Step (15) of this section, for practically all home network cases,
DHCP should be enabled. After checking this setting to satisfaction, Left-click the “Execute” button.