Filter
Top Products
Using the Assign menu 57
The key type is changed and a check mark appears beside the
selection.
7 To assign a directory entry to a Local key, see “Assigning a
directory entry to a feature key” (page 57).
--End--
Assigning a directory entry to a feature key
Follow this procedure to assign a directory entry to a feature. Assigning
a directory entry to a feature key gives you the ability to speed dial that
number when you press the key.
Prerequisites
The feature key you select must be defined as Local. See “Defining the
key type” (page 56).
Step Action
1 From the main menu, open the Feature menu.
A list of the feature keys and their current assignments appears.
2 Select the key defined as Local.
The Assign menu appears.
3 Press Feature.
The directory contact list opens.
4 Scroll through the list and select the entry to assign to the feature
key.
5 Press Ok.
A check mark appears beside that entry in the directory. The
number is dialed when you press the key.
--End--
Enabling or disabling autoscroll
If autoscroll is enabled, the IP Phone automatically directs you to the
screen for the active feature. For example, if your secondary Directory
Number (DN) is configured on screen two, and you receive a call to that
number, the feature screens scroll to page two. You can answer the call
immediately without searching for the screen.
Follow this procedure to enable or disable the autoscroll feature.
Carrier VoIP
Nortel IP Phone 2007 User Guide (CICM)
NN10300-020 02.03 Standard
7 March 2008
Copyright © 2007, 2008 Nortel Networks
.