Filter
Top Products
40 While on an active call
Step Action
1 On the screen, touch the key to which the Transfer feature is
assigned.
The call is put on hold and a dial tone sounds. On the display,
an indicator flashes beside the line on which the call is held.
2 Use the dialpad to enter the number to which to transfer the call.
3 When that number rings or is answered, touch the transfer key
again.
The call is transferred.
4 If the call is not answered, press the line key to resume and
terminate the call.
--End--
Using conference call
Follow this procedure to engage in a conference call.
The Three Way Call (3WC) feature allows you to add three calls to a
conference. If six port conference is available, you can add a maximum of
six calls to a conference. If six port conference is available, 6WC appears
beside a feature key in the display.
Step Action
1 On the screen, touch the key to which the conference call feature
is assigned, either 3WC or 6WC.
The call is put on hold and a dial tone sounds. On the display,
an indicator flashes beside the line on which the call is held.
2 Dial the number of the person you want to add to the call.
At this time, you can talk privately to the person you are adding,
to announce the conference.
3 Touch the conference key again to merge the calls.
4 Repeat steps 2 and 3 to add more calls to the conference.
5 If you make a mistake dialing, or a party does not want to be
included in the conference, press the extension key of the
conference call to reconnect to the conference.
--End--
Carrier VoIP
Nortel IP Phone 2007 User Guide (CICM)
NN10300-020 02.03 Standard
7 March 2008
Copyright © 2007, 2008 Nortel Networks
.