Filter
Top Products
25
.
Logging on
This section describes how to log on to the network. If the Centrex IP
Client Manager (CICM) is set up as part of a group of CICMs, you can
choose which CICM to connect to. After you select a gateway, the terminal
directs itself at that CICM and the Username screen appears.
If a firmware upgrade for the IP Phone is available, the system prompts
you to upgrade when you log on. If the firmware level is between the
minimum and maximum level set by the administrator, Yes and No options
appear on the soft keys. If the terminal is below the minimum level, the
only option available is Yes. You cannot log on until you perform the
upgrade.
To perform an upgrade, see “Performing a firmware upgrade” (page 75).
Step Action
1 If the Selective Gateway Login feature is configured on your
system, navigate through the list to select the gateway.
2 When the gateway you want appears, press Ok, or start entering
your username.
If the Username Screen appears when you start to enter your
user name, the characters you already entered appear at the
beginning of the Username field.
3 If you make a mistake, press Clear to clear the field, and then
enter the user name again.
If your user name is too long for the display (longer than 15
characters), the digits scroll to the left and an ellipsis appears to
the left of the user name.
4 Press Ok.
The Password screen appears.
5 Enter your password. For security, the password characters are
displayed as asterisks (*).
6 If you make an error, press Clear to clear the field, and then
enter the password again.
Carrier VoIP
Nortel IP Phone 2007 User Guide (CICM)
NN10300-020 02.03 Standard
7 March 2008
Copyright © 2007, 2008 Nortel Networks
.