Filter
Top Products
Operating your IP Phone 1220
135
• “Using Enhanced Override” on page 137
Overriding a busy signal
Use the Override feature to override a busy signal and interrupt another
call.
Using Forced Camp-on feature
Use the Forced Camp-on feature to automatically call a busy IP Phone
(internal or external) immediately after the IP Phone disconnects from the
current call.
1. Dial a number.
You receive busy tone.
2. Press the EnhOvr key.
or
Enter the Override FFC.
The person in the targeted call receives
a tone for approximately 1 second. After
the Override feature joins you to the call,
a short tone repeats every 16 seconds.
3. To terminate the call, press the
Goodbye key.
EnhOvr
or
(Goodbye)