Filter
Top Products
Page 62 of 62 Handset configuration
553-3001-229 Standard 1.00 November 2005
b. Select Init Contact.
c. Click OK.
d. Select Nortel features.
e. Click OK.
13 Set the Phase 2 authentication parameters.
a. Select Network Config > Security > Static Entry > VPN > VPN
Client IP > IKE Mode Config > Phase 2 - ESP.
b. Select Auth. Hash > SHA1.
c. Click OK.
d. Select Encryption > 3DES.
e. Click OK.
14 Set IP address and subnet.
a. Select Network Config > Security > Static Entry > VPN > VPN
Client IP > IKE Mode Config > Phase 2 - ESP > Remote Network.
b. Select IP Address.
c. Set the IP address to that of the VPN router.
d. Click Save.
e. Select IP Subnet.
f. Set the IP subnet to that of the VPN router.
g. Click Save.
15 Set Phase 2 Lifetime.
a. Select Network Config > Security > Static Entry > VPN > VPN
Client IP > IKE Mode Config > Phase 2 - ESP > Lifetime (sec).
b. Enter 2678400.
c. Click Save.
End of Procedure