Filter
Top Products
Users, interface and firewall configuration Page 55 of 62
WLAN Handset 2212 Installation and Configuration for VPN
14 Right-click in the tab and select Add New Rule.
A set of default rules is created on the tab as shown in Figure 31.
Figure 31
Override Rules
15 Select the Default Rules tab.
16 Right-click in the tab and select Add New Rule.
A set of default rules is created on the tab as shown in Figure 32
Figure 32
Default Rules
17 Select Manager > CSF/NAT.
18 Click Yes to exit
19 Click Yes to save the changes, and return to the Firewall Options page.
20 Select the policy you created starting at step 11 from the Policy list in the
Firewall/NAT Policy section.