Filter
Top Products
FEATURES
Caller ID (CLI)
This telephone set will display Caller ID (CLI) information received with
incoming calls. The last 90 Caller ID numbers received are automatically
stored in CLI memory (up to 21 digits each). The numbers stored in CLI
memory may be reviewed, deleted, or dialled back if desired.
When a new call received with CLI goes unanswered, the NEW CALL light
will flash. The number of new (unanswered) calls received with CLI is
indicated on the bottom row of the display. Note that the oldest call in the
list occupies position 01 and new calls are stored at the end of the list.
When CLI is restricted by the caller, “NO CLI” is displayed.
For international and payphone calls, “OUT OF AREA” is displayed.
Date and Time Indicates viewing
Stamp for CLI. IN or OUT List.
NEW
The call was
unanswered.
REPEAT
Call received
more than one.
Number of
calls in list.
Number of
new calls.
To Review the CLI Memory:
1. Press the SEARCH key until the “IN” icon is shown on the display.
2. Advance up or down to review received CLI numbers by pressing the
or keys. To view the most recent NEW CALL, press the key.
3. Press the DELETE key to remove the displayed number from the list.
To Dial Back from the CLI Memory:
1. Press the SEARCH key until the “IN” icon is shown on the display.
2. Advance up or down to the phone number you wish to dial by pressing
the or key.
3. When the required phone number is displayed, press the PBX DIAL key,
SPEAKER key, or lift the handset. The number is automatically dialled.
16