NEC AT-35 Telephone User Manual


 
BASIC OPERATION
Making a Call using the Handset
1. Pick up the handset and wait for dial tone.
2. Dial the number you require.
3. Replace the handset when you finish the call.
Or, to preview the dialled number:
1. Dial the number you require (while on-hook).
2. You may press the DELETE key to erase dialled digits one at a time.
3. When you have finished dialling, pick up the handset.
4. Replace the handset when you have finished the call.
Ö Adjust the volume if needed using the Handset Volume Control Switch.
Making a Call using Speakerphone
By using the SPEAKER key, you can make and receive calls without
picking up the handset. The speakerphone works in similar way to a
two-way radio; both parties cannot talk at the same time.
1. Press the SPEAKER key and wait for dial tone.
2. Dial the number you require.
3.
Once answered, converse in the normal way. Be sure to speak clearly
toward the microphone (located under the front edge of the phone).
4. To end the call, press the SPEAKER key.
Or, to preview the dialled number:
1. Dial the number you require (while on-hook).
2. You may press the DELETE key to erase dialled digits one at a time.
3. When you have finished dialling, press the SPEAKER key.
4.
Once answered, converse in the normal way. Be sure to speak clearly
toward the microphone (located under the front edge of the phone).
5. To end the call, press the SPEAKER key.
Ö Adjust the speaker volume if needed by pressing the VOLUME key.
10