Filter
Top Products
Quick Start Instructions MultiVOIP User Guide
48
Phone/IP Details *Absolutely Needed* (cont’d)
Gather Telephone Information (E1)
9
E1 Phone Parameters
Ask phone company or
PBX maintainer.
Info needed to operate:
MVP3010
E1 Telephony Parameters:
Record for this VOIP Site
#
•
Which frame format is used? Double Frame_____
MultiFrame w/ CRC4_____
MultiFrame w/ CRC4 modified_____
•
Which CAS or PRI protocol is used? ______________
•
Clocking: Does the PBX or telco switch use
internal or external clocking? _________________
Note that the setting used in the voip unit will be the
opposite of the setting used by the telco/PBX.
•
Which line coding is used? AMI___ or HDB3___
•
Pulse shape level?: (most commonly 0 to 40 meters)
Gather Telephone Information (Analog)
9
Analog Phone Parameters
Ask phone company or
telecom manager.
Needed for
:
MVP810
MVP410
MVP210
MVP130
MVP130FXS
Analog Telephony Interface Parameters:
Record for this VOIP Site
#
•
Which interface type (or “signaling”) is used?
E&M_____ FXS/FXO_____
•
If FXS, determine whether the line will be used for a
phone, fax, or KTS (key telephone system)
•
If FXO, determine if line will be an analog PBX
extension or an analog line from a telco central office
•
If E&M, determine these aspects of the E&M trunk
line from the PBX:
• What is its Type (1, 2, 3, 4, or 5)?
• Is it 2-wire or 4-wire?
• Is it Dial-Tone or Wink?