Filter
Top Products
Technical Configuration (Analog/BRI) MultiVOIP User Guide
230
The Voice/FAX Parameters fields are described in the tables below.
Voice/Fax Parameter Definitions
Field Name Values Description
Default --
When this button is clicked, all
Voice/FAX parameters are set to their
default values.
Select
Channel
1-2 (210)
1-4 (410)
1-8 (810)
Channel to be configured is selected
here.
Copy
Channel
--
Copies the Voice/FAX attributes of
one channel to another channel.
Attributes can be copied to multiple
channels or all channels at once.
Not applicable to MVP130.
Voice Gain --
Signal amplification (or attenuation)
in dB.
Input Gain
+31dB
to
–31dB
Modifies audio level entering voice
channel before it is sent over the
network to the remote VOIP. The
default & recommended value is 0 dB.
Output Gain
+31dB
to
–31dB
Modifies audio level being output to
the device attached to the voice
channel. The default and
recommended value is 0 dB.
DTMF Parameters
DTMF Gain --
The DTMF Gain (Dual Tone Multi-
Frequency) controls the volume level
of the DTMF tones sent out for Touch-
Tone dialing.
DTMF Gain,
High Tones
+3dB to
-31dB &
“mute”
Default value: -4 dB. Not to be
changed except under supervision of
MultiTech’s Technical Support.
DTMF Gain,
Low Tones
+3dB to
-31dB &
“mute”
Default value: -7 dB. Not to be
changed except under supervision of
MultiTech’s Technical Support.