Filter
Top Products
Chapter 3 – Related MultiVOIP Setup Parameters
54 Multi-Tech Systems, Inc. Avaya Communication Manager Guide
Existing Endpoints Parameter Definitions
Field Name Values Description
Type Gatekeeper,
Gateway,
MCU,
Terminal,
or
Undefined.
The endpoint type . When an endpoint attempts to register with the
Gatekeeper, the Gatekeeper compares the endpoint type with the predefined
value. If the Gatekeeper detects a discrepancy, the registration is not
accepted. If you are not sure of the endpoint type, select Undefined, which
allows any endpoint of any type to register with the Gatekeeper.
(Multipoint Control Units, MCUs, are used to facilitate conference calls.)
Online +
or
[blank]
When “+” appears, the endpoint’s registration is dynamic or “online.”
PreDef +
or
[blank]
When “+” appears, the endpoint’s registration is static or “predefined.”
Registration
IP
n.n.n.n
0-255
The RAS address and RAS port of the endpoint.
Name The H.323 ID alias of the endpoint.
Phone The e164 alias number (conventional PSTN phone number)of the endpoint.
Other
Aliases
Additional aliases for the endpoint: URL, e-mail address, transport address,
party.address, or private network number (per ISO/IEC 11571).
Alias addresses must be unique within a zone. Gatekeepers themselves cannot
have aliases.
Msg LRQ,
RRQ,
URQ, or
AppURQ
The type of message sent by the endpoint when the mode for processing
registration is manual. This can be an LRQ, RRQ, URQ, or AppURQ (which is
a URQ sent by the Gatekeeper).).).
TTL seconds
The time remaining in seconds before the TimeToLive timer expires. If the
endpoint fails to reregister within this time, the endpoint is unregistered.
Command Buttons
Add -- Opens an empty Predefined Properties dialog box where you can
predefine a new registration.
Unregister -- Sends a URQ message to the selected endpoint, deleting the online (or
dynamic) registration properties and unregistering the endpoint.
Unregister
All
-- Sends a URQ to all the online endpoints in order to unregister them.
Disconnect
Endpoint
-- Disconnects all calls with which the endpoint is involved.
Delete -- Deletes the endpoint from the Gatekeeper database. A URQ will not be
sent to the endpoint.
Del Pre-def -- Deletes the predefined (static) properties of the endpoint.
Online
Properties
-- Opens the Online properties screen or the selected endpoint whereupon
are shown details of that endpoint’s configuration.