Filter
Top Products
Chapter 2 - Configuration
Multi-Tech Systems, Inc. Avaya Communication Manager Guide 19
6f. To accommodate the MultiVOIP unit, the following fields in the Communication Manager “Trunk
Group – Page 1” form must be set as shown:
Dial Access? = n
Service Type = tie
Group Type = ISDN
Carrier Medium = IP/H.323
6g. To accommodate the MultiVOIP unit, all of the MultiVOIP’s DID channels must be listed as trunk-
group members in the Communication Manager Trunk Group form (“Change Trunk-Group”
dialog box).
For example, if four channels of an MVP810-AV are configured as DID, four trunk group numbers
must be listed, as above.