Filter
Top Products
Chapter 2 – Configuration
16 Multi-Tech Systems, Inc. Avaya Communication Manager Guide
5g. To accommodate the MultiVOIP unit, the following fields in the Communication Manager “Trunk
Group – Page 1” form must be set as shown:
Dial Access? = y
Service Type = tie
Group Type = ISDN
Carrier Medium = IP/H.323
5h. To accommodate the MultiVOIP unit, all of the MultiVOIP’s FXO channels must be listed as trunk-
group members in the Communication Manager Trunk Group form (“Change Trunk-Group” dialog
box).
For example, if four channels of an MVP810-AV are configured as FXO, four trunk group numbers
must be listed, as above.