Filter
Top Products
Speed Calling
/
1
Press cancel key (3)
if you’ve made a mistake and want to leave the
previously saved number intact.
: :
:
.‘.
Press
program/save
key (2)
The new number is now saved.
Record identity of new number
Carefully remove the clear plastic card cover and
write the number identity on the line next to the
speed call key.
Organizing speed call numbers
Avoid confusion by writing down long numbers
exactly as you would dial them.
For example, a typical long-distance telephone
number would be dialed as follows:
9 + 1 + 613 + 5550000
1 1 lLg;;~;;~;;ber
outside line access number
These are some special codes that can be inserted
into the saved telephone number:
>kl - This causes automatic dialing to be suspended
for 5 seconds, and is used to allow telephone
exchange equipment to prepare for reception
of more digits.
>le2 - Used wherever you have to wait for dial tone.
You may find that in some areas, >kl is more
useful than >k2.
*3 - Indicates where in the number string, a
predialed sequence will be inserted. This code
must be followed by a l-digit number (between
1 and 9) that specifies the quantity of digits to
be dialed manually.
>k5 - Used for an intercom number. Dial the
extension number of another Superset set, plus I.:’
>k5. These calls are routed to the other set’s j’
speaker, even if the set is busy.
2-17
Technical Manuals Online! - http://www.tech-man.com