Filter
Top Products
Mitel
®
8528 Telephone User Guide – Issue 2, June 2010 Page 35
Call Features
Using Dynamic Extension Express
When you enable Dynamic Extension Express on your telephone, your incoming calls are
automatically routed to one or more preprogrammed associated destinations according to the
routing steps programmed for you.
Typically, your desk phone is configured to be your main extension. You may be programmed
for up to five associated destinations including:
• softphone
• home IP phone
• voice mail
• mobile phone
• home phone
Your desk phone, softphone, home IP phone and voice mail extensions are already
programmed in the system, so your system administrator can easily include them in your routing
steps. To include your mobile and home phone numbers in your routing steps, you will need to
provide these numbers to your system administrator.
Dynamic Extension Express also includes the Handoff feature, which includes the following
functions:
• Push: The Handoff “push” function allows you to move an active call from your main
extension, typically your desk phone, to an associated destination without disconnecting
audio. The push function is useful if you are leaving the work area, but want to remain
connected to an active call. The push function rings all associated destinations (except
voice mail) and you select which device to use to answer the call. When you answer the
call, you are immediately connected to the other parties at the new destination. When the
call is switching over to the new destination, there may be a momentary break in audio,
which may be noticeable to the other parties on the call.
• Pull: The Handoff “pull” function allows you to pull a call that was previously routed to your
mobile or home phone back to the main extension. The pull function is useful if you
answer a call on your mobile phone and then return to your desk. After you pull a call back
to the main extension, the call is connected immediately and you can then access system
features such as conference, hold, and transfer.
Dynamic Extension Express includes the following feature codes:
• Dynamic Extension Express On: 363
• Dynamic Extension Express Off: 362
• Dynamic Extension Express On/Off: 364
• Dynamic Extension Express – Handoff (push and pull): 388
The following call types do not follow Dynamic Extension Express:
• Hunt group calls
• Hunt group announcement/overflow calls
• Transfer recalls, Hold recalls, Conference recalls, and Attendant recalls
NOTE
The Handoff feature is only supported on your main extension, typically your desk
phone. However, if you share a desk phone with one or more coworkers and your
main extension is a phantom extension, you cannot use the Handoff feature.
NOTE
A recall occurs when a feature cannot be completed or the feature times out, and
the call returns to the originating extension. For example, a holding call will recall
the extension where it was placed on hold when the hold timer expires.