Filter
Top Products
Mitel Networks 5700 VFA End Point’s Guide 27
8STARTING A CALL THROUGH A GATEWAY
You can start a videoconference from a LAN connection to an ISDN destination
through a gateway. The default function code for starting a call through a gateway
is 9. The system administrator may change this code, if necessary
(see the Mitel Networks 5700 Voice First Application Administrator’s Guide).
NOTE You cannot make an external call in Voice First mode.
! To start a LAN-to-ISDN call through a gateway
" In the LAN Manual Dialer, dial [gateway’s service access number][1st
ISDN number].
Set the required Bandwidth or use the default bandwidth. To display the
Bandwidth, click Options.
Dialing a LAN-to-ISDN Call Through a Gateway (in MeetingPoint 4.6)
Enter service access
number + ISDN no.
Select the required
bandwidth.
Click Options.