Filter
Top Products
Chapter 4 Call Forward
12 Mitel Networks 5700 VFA End Point’s Guide
4.2 Setting Call Forward in Other H.323
Videoconferencing Applications
In 5760 VCA and other H.323 videoconferencing applications, you can enable Call
Forwarding by dialing a code. If you do not know the code, ask the system
administrator.
! To set Call Forward
1. Open your application’s Dialing utility.
2. Dial one of the following (bold values are factory defaults):
NOTE After dialing, a “Call Rejected” message appears. However, the request is
accepted by the 5700 VFA if the dialed number is valid.
For this feature Dial this number
Forward if No
Answer
*70 (or other code number) followed by [other
destination directory number]
Activate if you want to forward calls intended for you to
another user. The interval before transferring the call is
set by the system adminstrator.
For example, *70751will forward calls to user 751.
Forward if Busy *71 (or other code number) followed by [other
destination directory number]
Activate if you want to forward calls to another user if
you are engaged in another videoconference.
For example, *71751will forward calls to user 751.
Unconditional
forwarding
*72 (or other code number) followed by [other
destination directory number]
Activate if you want to forward all calls intended for
you to another user.
For example, *72751will forward calls to user 751.