Filter
Top Products
Mitel Networks 5700 VFA End Point’s Guide 19
6CALL TRANSFER
In a transferred call, the videoconference is transferred from the initiator to another
user. The conference continues between the original remote party and the user that
received the transfer. The user that initiated the transfer is disconnected from the
videoconference.
NOTE When the 5700 VFA is connected to a 3300 ICP (Voice First Mode), you
do not need to program these settings (the 5700 VFA uses the Call
Transfer settings of the 3300 ICP).
6.1 Call Transfer in MeetingPoint
®
4.6
! To transfer a call to another user
Transfer Dialog Box
2. In the Destination box, enter the directory number of the user that will
receive the call by one of the following methods:
— Type the number or click it in the list.
-or-
—Click Browse at the end of the row. In the Select an Entry dialog box,
select the user and click OK (see page 4-11 for an illustration).
3. Click OK.
The call is transferred to this user. If that party accepts the call, you are
disconnected from the videoconference. The call continues between the
original remote party and the newly-joined party.
1. In MeetingPoint’s Conference Panel, click the Services arrow and
then click Transfer. The Transfer dialog box appears.