Filter
Top Products
Chapter 2 Registering to the 5700 VFA
6 Mitel Networks 5700 VFA End Point’s Guide
2.3 Registration by Other H.323 Videoconferencing
User
If the 5700 VFA is in Open mode for all H.323 users, it automatically permits third-
party (non-Mitel Networks) users to register.
If the login attempt is unsuccessful, contact your system administrator. In this case,
the administrator must grant you login permission manually.
! To log in to the 5700 VFA
1. In your videoconferencing application’s Gatekeeper setup, enter the IP
Address of the 5700 VFA (ask your system administrator). When entering
an IP address, do not enter leading zeroes.
2. Continue your application’s required procedure (such as exiting and
restarting the application) for implementing setup changes.
3. If the first login attempt is unsuccessful, notify the system administrator,
who will change the required login permission properties.
4. If your application requires, exit and log in again.