Filter
Top Products
6
LISTENING TO TRANSMISSIONS:
When the unit is on, it will automatically broadcast the incoming signal when a
strong incoming signal is received on the selected channel.
NOTE: When transmitting, hold the unit in a vertical position with the
microphone one to two inches (2.5 to 5 cm) away from your mouth. Keep the
antenna at least one inch (2.5cm) from your head and body.
OPERATION
Press and hold the POWER button
for over one second; a confirmation
tone will sound.
Press and hold the POWER button
again for over two seconds to turn
the power off.
1
Press the CHANNEL/VOLUME Up ❶
or Down ❷ button to raise/lower the
volume. The number on the display
will indicate the volume level. If
necessary, press and hold the Monitor
button ❸ for two seconds so sound
will be heard through the speaker.
1
2
3
1
TURNING THE UNIT ON/OFF
ADJUSTING THE VOLUME
Press and hold the PTT button and
speak into the built-in microphone (or
the external microphone, if connected).
When the PTT button is pressed, the
Signal Strength indicators will light to
indicate the signal strength and the
speaker will be muted.
1
When the PTT button is released, you
can now listen to incoming
messages.
2
TALKING TO ANOTHER PARTY (TRANSMITTING)
To send your outgoing messages and to communicate with another party, see the
following:
MK1996.OM.QXD 5/19/03 12:03 PM Page 6