Memorex MK1996 Two-Way Radio User Manual


 
Thank you for purchasing this Memorex product.
The serial number of your unit can be found on a label on the back of the cabinet. We
suggest that you record the serial number in the space provided below in case this
information is ever needed at a future date.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE
YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR
MEMOREX.
Model Number: MK1996
Serial Number: _______________________________________
1
SAFETY PRECAUTIONS
FCC WARNINGS:
This device complies with part 15 of the FCC rules. Operation is subject to the
condition that this device does not cause harmful interference.
Safety Training Information:
Your FM handheld transceiver generates RF electromagnetic energy during
Transmit mode. This radio is designed for and classified as “Controlled
Exposure/Occupation Environment”, meaning it must be used only during the
course of employment by individuals aware of the hazards and the ways to
minimize such hazards. This radio is NOT intended for use by the “General”
population/uncontrolled environment.
This radio complies with FCC RF radiation exposure limits set forth for a
controlled environment. This radio should be installed and operated with a
minimum distance of one inch (2.5 centimeters) between the radio and your body.
Therefore, to ensure that your exposure to RF electromagnetic energy is within
the FCC allowable limits for occupational use, always follow below information.
Do not operate the radio without a proper antenna as this may damage the
radio and may also cause you to exceed FCC RF radiation exposure limits. A
proper antenna is the antenna supplied with this radio by the manufacturer or
an antenna specifically authorized by the manufacturer for use with this radio.
Do not transmit for more than 50% of the total radio use time (“50% duty
cycle”). Transmitting for more than 50% of the time can cause FCC RF
exposure compliance requirements to be exceeded.
Always use memcorp supplied antennas, batteries, belt clips, speaker, mic,
etc. Use of unauthorized accessories can cause the FCC RF compliance
requirements to be exceeded.
Always keep the antenna at least one inch (2.5 centimeters) away from the
body when transmitting and only use the belt clip when attaching the radio to
your belt, etc to ensure that FCC RF exposure compliance requirements are
not exceeded.
ATTENTION:
This radio complies with the FCC RF exposure limits for
Occupational Use Only.
MK1996.OM.QXD 5/19/03 12:03 PM Page 1