Filter
Top Products
11
Press the FUNC button ❶, then
select a desired channel using the
CHANNEL/VOLUME Up ❷ or Down
❸ buttons. Press the FUNC button ❶
again to confirm the channel.
2
1
3
1
Press the CALL button once and wait
for the party’s response.
2
CALLING ANOTHER PARTY
To alert another party that you wish to communicate with them, perform the following:
To activate, press and hold the
Monitor button for two seconds; the
Monitor indicator will appear.
1
To disable and return to normal
operation, press the Monitor button
again for two seconds; the Monitor
indicator will disappear.
2
MONITORING THE CHANNEL
This feature is used for listening to weak signals or to hear all activities on the
channel by manually overriding the channel sub-tone code setting as follows:
NOTES:
• Note that both the calling and receiving units must be on the same main
channel and sub-channel for the call function to work.
• When the CALL button is pressed, the Signal Strength indicators will appear
in the display.
OPERATION (CONTINUED)
MK1996.OM.QXD 5/19/03 12:03 PM Page 11